Works with MSFS 2024: Yes – Tested by SceneryAddons – Read Disclaimer
Works with MSFS 2020: Yes – Native
Info
Note: To use VDGS (Visual Docking Guidance System), see “Extras\README.txt”. If you use MSFS 2024, create a free Aerosoft account and install VDGS inside the Aerosoft One client instead.
Note: To use VDGS (Visual Docking Guidance System), see “Extras\README.txt”. If you use MSFS 2024, create a free Aerosoft account and install VDGS inside the Aerosoft One client instead.
“Aerosoft Mega Airport Ben Gurion”
Ben Gurion International Airport (IATA: TLV, ICAO: LLBG) (commonly known by its Hebrew acronym as Natbag) is the largest airport in Israel. It is said to be the world’s most secure airport.
The original layout of the airfield as designed in the 1930s included four intersecting 800 m runways. However, none of this original layout is visible nowadays since as usa … read morege increased and aircraft types and needs changed over the years various runways on the airport’s premises were built and removed.
The scenery of Ben Gurion Airport offers accurate depictions of the terminals 1 and 3 as well as dynamic lighting and high-resolution, photorealistic ground texture. A custom animated jetway system for all gates additionally brings the airport to life.
Features:
• Accurate Terminal 3 and the old Terminal 1 buildings, concourse, hangars, towers, and airport layout
• Full Dynamic Lighting
• Custom animated jetway system for all gates
• Custom runway and apron/tarmac textures
• High resolution (20cm pixel) photoreal seasonal ground textures
• Color-corrected ground textures to reflect real-world topography colors
• Static airplane on apron (old EL AL 777)
• Fully optimized for smooth simulation experience
Ben Gurion International Airport (IATA: TLV, ICAO: LLBG) (commonly known by its Hebrew acronym as Natbag) is the largest airport in Israel. It is said to be the world’s most secure airport.
The original layout of the airfield as designed in the 1930s included four intersecting 800 m runways. However, none of this original layout is visible nowadays since as usa … read morege increased and aircraft types and needs changed over the years various runways on the airport’s premises were built and removed.
The scenery of Ben Gurion Airport offers accurate depictions of the terminals 1 and 3 as well as dynamic lighting and high-resolution, photorealistic ground texture. A custom animated jetway system for all gates additionally brings the airport to life.
Features:
• Accurate Terminal 3 and the old Terminal 1 buildings, concourse, hangars, towers, and airport layout
• Full Dynamic Lighting
• Custom animated jetway system for all gates
• Custom runway and apron/tarmac textures
• High resolution (20cm pixel) photoreal seasonal ground textures
• Color-corrected ground textures to reflect real-world topography colors
• Static airplane on apron (old EL AL 777)
• Fully optimized for smooth simulation experience
New comments disabled. Please follow our Help page on any problems or contact us for any suggestions.
Hi can someone help me pls?
The jetways is bot showing for me
Can you add older version (older than 1.2.0) i missing textures
Thank you.
The texture of the jetways doesn’t load properly. Some jetways are purple checkered.
Same
The jetways do NOT work, go with the older version
This version crashes to desktop
If anyone still has problems with v1.2.6, send a screenshot (I was never able to find any mesh issues)
Like i posted on an earlier comment, I examined the area carefully from the reports of users, & think i’ve found them:
1st and most potent one, the area engulfed by the taxiways N, E ,R.
2nd one, the area engulfed by taxiways R, W3, W4, Runway 12-30, Runway 08-26.
(Basically the areas, where there are the 2 big drainage channels.)
Pls confirm if you have them, in my scenery they still exist.
That’s why I asked for a screenshot, I cannot see anything wrong there on my machine
Here’s an example of the pics you asked: https://imgur.com/a/wyt8k3j
First photo, is the mesh area inside taxiways N, E ,R.
Second photo is the mesh area inside taxiways R, W3, W4, Runway 12-30, Runway 08-26.
Hope you find it useful.
Alright, I found them thanks to the screens. Really very minor issue, but I added the old one back now
In addition to the below issues reported also missing runway markings like touchdown markings on runway 30. This version is really bad… any chance to upload the older version please ?
v1.2.6:
– Added the missing runway marking and runway numbers
Any chance to upload the previous version ? This version has mesh issues and low fps/stutters.
Latest version 1.2.5 there are now strange hills and mesh issues all over the non built area of the airport.
Where did you spot the man? I wanna check as well. Do you perhaps have data off?
same issue
same issue. hills in the middle of the airport
I think i’ve found them and i understand what you mean, please confirm if it’s them, or if there are more:
1st and most potent one, the area engulfed by the taxiways N, E ,R.
2nd one, the area engulfed by taxiways R, W3, W4, Runway 12-30, Runway 08-26.
Basically the areas, where there are the 2 big drainage channels.
Lost texture Jeway, Please help
Same
same can simplaza upload the previus version pls?
How to use VDGS with GSX PRO. Follow instruction but not working. Only Marshaller guiding to the gate.
you need a GSX profile, DL one from Flightsim.to
Having ctd when loggin into the airport. anyone else so i can confirm if its the airport or not?
I just got one.
My country 😃
Does it have functional VGDS system?
probably but you need to have the vdgs aerosoft app for that you need to buy the airport
Misinformation, it’s free (README.txt)
cant extract or copy the folder to my community folder. folder name is too long lol
somebody any ideas?
Me too, a solution please ?
Copy only the archives and then unpack them directly in the folder. There is no other solution yet.
nice
Kiitos mestari!
Guys, any chance to remove static aircrafts?
Thank you SimPlaza!
Downloaded and tried to use VDGS, it doesn’t work because you changed the folder name by adding airport, which will cause VDGS driver to fail to find the airport.
It’s the other way around, it won’t work with the old name. Thats why we changed it to the original one, see “aerosoft-vdgs-driver/airports/aerosoft_llbg.xml”
Hi, there is a new update released yesterday. By any chance, could you please update it? Thank you!!
That was super fast, thank you for the 1.1.0.0 update!
Lovely. My only complaint is that the E gates, have different number on the world map ( gate E5, E6 etc) and different number on the airport ( E5G, E6G etc)
It’s great airport.
Does it have functional VGDS system? (Visual Guidance Docking System)
does it have functional vgds?
thank you for bringing the updated version!
How to install the airport ?
cant figure out how to install it
Awesome!! thanks!
Thank you so much!
Im Love You
Good
Thank you, Merry Christmas
Comments are closed.