Skip to content

FlyTampa – Corfu Island & LGKR Corfu International Airport v1.1.0
MSFS 2020

Addon Screenshot
Works with MSFS 2024: Unknown
Works with MSFS 2020: Yes – Native
Features:

• Ioannis Kapodistrias International Airport (LGKR)
• Corfu Island fully modeled
• Enhanced 3D city lighting
• PBR materials on airport buildings and ground (4K and 8K)
• Internal terminal modeling
• Apron clutter and customized airport detail
• Custom animated vehicle traffic
• Animated passenger crowd
• Custom sea vessels with AI routes around Corfu island
New comments disabled. Please follow our Help page on any problems or contact us for any suggestions.

70 thoughts on “FlyTampa – Corfu Island & LGKR Corfu International Airport v1.1.0
MSFS 2020

  1. installed today uninstalled today. as soon as the airport loading during descent my 787-10 went absolutely haywire, fmc throwing all kind of errors auto throttles not working couldnt hold the Rnav approach and ended up putting me in the sea? uninstalled did the same flight again with the standard airport and all was fine. must be the airport

  2. Is the GSX-Profile available anywhere to download. The Original on fs.to is not available anymore.

  3. I have airport not appearing and not sure if island is. Tried pulling out everything out of community folder. However I have just few details form interior thats it. Anyone else?

  4. Great addon like always. FlyTampa mods are worth every penny.
    Thank you for letting us test it.
    No issues or fps drops in SU10 Beta.

    1. Doubt it but i’m checking now. Anytime there is an areal custom mesh it will always cause problems on some systems. Happens to me with ORBX Panama as well when i get too low above the canal where the ships are.

      With this one it’s different though, the sounds stutters are a first for me.

    2. I don’t have any stutters or sound cut outs testing with SU10 Beta and many different 3rd party planes .

    1. just delete the island scenery and keep only the airport. That fixed it for me. They modeled the entire island which is honestly quite impressive but that causes CPU and GPU to work on heavy load resulting in either low FPS or stuttering

      1. I also deleted the island and it’s much better. No stutters and no flickering buildings in the city. With the island installed all the buildings are flickering like when we are not using anti aliasing. I think they did that to increase performance, but even like that performance sucks and the flickering is unbearable for me. Without the island it’s ok, just some flickering on the airport light poles too, but bearable.

  5. Lovely scenery with great detail – definitely worth the money!
    Having no issues in current Beta of MSFS, no glitches, no fps drop.

  6. It does need an update. I’m experiencing (as someone else mentioned below) some weird stuff in the sim that never happened with me. Only happens when i fly around the island.

    Micro-stutters and for the first time: Sound stutters.

    Let’s face it, no scenery is perfect in MSFS in V1.0.0. Sooooooo……..it needs an update.

  7. This works and looks absolutely fantastic. The folks that are having issues are either shilling for Fly Tampa or have some other scenery in their community folder, make sure you have no freeware or payware installed that might cover this area. I know for a fact that dev’s and fan boys will come on here and say there are problems with the scenery and/or aircraft to try and dissuade folks from downloading it, not saying that this is the case here but try the airports, scenery and aircraft first for yourselves before arriving at any conclusions.

    Thanks Sim Plaza for letting us test these payware products.

    1. I tried it and it is very nice but my sim started to CTD all the time. After I removed it CTD’s stopped. Might be conflicting with another mod and other people might not have the same problem but yeah thats my story.

    2. I use addon linker and only have the scenery/airports active (in community) which I fly from/to.

  8. Hi, folks…
    whoever uses “Bijan Seasons”, great application, but creates landclass masks
    around world… should delete “Bijan Terrain Masks NH – Experimental
    40″ folder from Community folder and problem disappears… at least for
    me!!!

    1. Don’t have the terrain masks installed. And the airport is working for me in general. No scenery glitches seen. No fps drop. But weird sim behaviour during initial approach. Sound and sim stutters (first time I have these since… long time ago). Got better after landing / during taxi. Could be the Corfu island scenery. Don’t know.

      1. Today I departed from LGKR. Same sound and sim stutters after liftoff, but much less than on arrival. I think it’s not the airport itself, but the island scenery. Who knows. After 20mins into flight, stutters stopped and all was fluid. Let’s wait for an update.

  9. Why it’s almost none general aviation aerodromes in Greece? Is it Black Colonels rules still? 🙂

    1. Oh man there are so many GA airports. Check out the Greek Airfields (freeware) series by jackzyg on flightsim.to. Not all are GA-only but many of the hundreds of airfields in Greece are not served by any bigger category aircraft.

      1. Just downloading atm but try placing the mesh entry at a lower priority to the airport entry in your content.xml file. I have heard there are 2 folders, one for the main island (I’m calling this the mesh for the moment) and one for the airport. Ensure the airport file has a higher priority in the content.xml file. ie. make sure it’s nearer the bottom of the file list. I’ll have a better idea once I’ve actually installed it myself

        1. yes… I have already checked this.. nothing changed… probably, there is a problem with “ft_lgkr_terminal_platform” file… we have to wait for update… 😉

      2. checked the scenery, works fine for me. Maybe check to enure you don’t still have the free one installed. That’s all I’ve got , sorry

    1. Hello, i have the same problems, the land-class and mesh are “pinke”.
      Furthermore some buildings on the airport area. Please contact fly tampa. Thanks

  10. Mesh collision with the terminal walls, can’t enter the terminal building. It’s a thing Asobo introduced in SU8. Airports devs need to turn it off or something in their own sceneries. He didn’t bother doing so.

    1. muzzball the great

      Its defiantly deliberate. Its to stop you seeing the low detail internals. They are just there to give the illusion of something inside from the outside. I think its a great idea.
      Go play a mall simulator if you want to look at shops.

      1. “Defiantly”, “Muzzball”, boy you must be something really special. No one wants to look at shops, i want to visit the TERMINAL, either pre-flight or post-flight because it adds to the immersion. For your information, this issue has already been vote-logged on the forum and recognized by Asobo and many people are already voting to reverse it to the way it was pre-SU8.

        Flytampa chose not to edit it and i’m just pointing it out.

        1. muzzball the great

          Definitely no vadge for you. Do you slew through the terminal pretending to be aircrew ?

          Flytampax did this on purpose and I hope more developers follow. Fucking internals are a big waste of development time. There are so many airports with fancy internals and totally shit externals. Corfu is great throughout though.

    2. FlyTampa-Corfu
      Ioannis Kapodistrias International Airport (LGKR) 
      Corfu Island fully modelled and enhanced 3D city lighting (MSFS)
      PBR materials on airport buildings and ground 4K and 8K (MSFS)
      Internal terminal modelling (MSFS)
      Apron clutter and customized airport detail
      Custom animated vehicle traffic and animated passenger crowd (MSFS)
      Custom sea vessels with AI routes around Corfu island(MSFS)

Comments are closed.