Works with MSFS 2024: Yes – Tested by SceneryAddons – Read Disclaimer
Works with MSFS 2020: Yes – Native
Info
Note: This airport conflicts with Orbx LKPR airport, only use one of the two.
Note: To use VDGS (Visual Docking Guidance System), see “Extras\README.txt”. If you use MSFS 2024, create a free Aerosoft account and install VDGS inside the Aerosoft One client instead.
Note: This airport conflicts with Orbx LKPR airport, only use one of the two.
Note: To use VDGS (Visual Docking Guidance System), see “Extras\README.txt”. If you use MSFS 2024, create a free Aerosoft account and install VDGS inside the Aerosoft One client instead.
Prague Václav Havel Airport, formerly Prague Ruzyne International Airport, is the international airport of Prague, the capital of the Czech Republic. It is located 10 kilometers (6 mi) west of the city center. It serves as a hub for Czech Airlines as well as a base for Travel Service Airlines including its subsidiary SmartWings.
Airport Prague is the latest development by Tailstrike Designs for t … read morehe Microsoft Flight Simulator. Enjoy the realistic rendition of the Czech capital airport with photorealistic texture, highly detailed models of airport terminals, hangars, buildings and airport vehicles as well as accurate taxiway and runways (2022 layout).
Numerous little animations and the precise night lighting round of the airport in the details and create a lifelike and lively rendition of the “Letište Václava Havla Praha”.
Features:
• Highly accurate recreation of Václav Havel Airport Prague (LKPR)
• Highly detailed models of airport terminals, hangars, buildings and airport vehicles
• Accurate taxiway and runways (2022 layout)
• Accurate terrain and runway profile
• Tower and Terminal interior
• Photorealistic texture with PBR-Workflow
• Custom animated Jetways
• Realistic night time dynamic lighting
• Supports the Aerosoft VDGS module
Airport Prague is the latest development by Tailstrike Designs for t … read morehe Microsoft Flight Simulator. Enjoy the realistic rendition of the Czech capital airport with photorealistic texture, highly detailed models of airport terminals, hangars, buildings and airport vehicles as well as accurate taxiway and runways (2022 layout).
Numerous little animations and the precise night lighting round of the airport in the details and create a lifelike and lively rendition of the “Letište Václava Havla Praha”.
Features:
• Highly accurate recreation of Václav Havel Airport Prague (LKPR)
• Highly detailed models of airport terminals, hangars, buildings and airport vehicles
• Accurate taxiway and runways (2022 layout)
• Accurate terrain and runway profile
• Tower and Terminal interior
• Photorealistic texture with PBR-Workflow
• Custom animated Jetways
• Realistic night time dynamic lighting
• Supports the Aerosoft VDGS module
New comments disabled. Please follow our Help page on any problems or contact us for any suggestions.
Unfortunately this scenery is crap because all of a sudden you have no ILS frequencies. You can land here only manually. If you remove the scenery you get back default LKPR crappy quality MSFS airport, but at least frequencies are there…
Any way to fix FPS there? It’s crazy slow! I think it’s caused by the people inside terminal.
still stutters
Best night lighting around <3 Bought this one to support.
Completely messed up by the WU unfortunately
Crash every time
absolutely disgusting, I have a 4090, i9 12900k, 32gd ddr and in vr it is unusable, the vrams are saturated immediately starting to go all in fits and starts.
What about the optimazed performance in v1.0.3 ? Any changes? Or still an fps killer compared to ORBX version? 🙂
The runways are like washboards, with large elevation changes. (v1.0.3)
1.0.3?
– Fixed Airport traffic driving where they should not
– Updated Ground Lines
– Removed Tower Beacon (finally)
– Changed Terminal Glass Opacity
– Moved some 3D
– Replaced some 3D mesh with real mfs terrain
– General Bug Fixes
– Optimized Performance
where
Did the Aerosoft VDGS works for anyone here? THe VDGS driver (newest version) don`t recognize this airport for me. I get the “no items to display” information.
how is the performance compared to previous versions and orbx?
Unchanged absolute FPS/Mainthread killer.
That’s the only reason I switched to ORBX. Visually not so perfect, but much more economical
Yeah this thing was stutter central for me.. almost unusable!
“was” – is it now?
Is anybody having issues with the Jetway? I cannot connect jetway to my playne using this airport.
where should i download this to?
what folder
community folder
everything from this website goes in community folder unlesss otherwise stated.
Very nice scenery, as it said in comments better performance than ORBX -at this time-, but still can be improved, facing the terminal I can barely hit 30fps. It is way too detailed inside the building.
You think performance is better than with the Orbx? Not on my system 🙂
One question for SP, do You recommend DX12 or DX11, I have RTX 3070 and some fluidity problems. Thanks for your contribution.
DX12 is still not ripe yet, you’ll have ground texture bugs at airports if you use it
Ok Thank you, I come back to DX 11
Does the parking system works for you all? For me it is blank
What a beauty! I was fine with the ORBX one but this here is another level. Better graphics, better frames, better gates. It is just like the real one.
Thanks simplaza for letting us try out stuff before buying it!
I have downloaded it to test it against the ORBX one and I must say the Tailstrike Scenery it’s another level. The custom lights are insane!!! Please support the DEV, or they will not make any good scenery anymore.
Agreed. This one is worth purchasing
Taxi ways suddenly have steps etc…. this airfield does not work at all
uhm that is your version, not mine
Have you covered all the taxi routes?
The airport is fantastically realised, but what use is it if there is suddenly a 2 metre high step? Admittedly, when you drive away from a gate, you can’t get past this point.
Can you specify which gate and what taxiway?
never seen such wonderful custom lights in VR
Thankyou simplaza for this release I had tried both and ended purchasing this one. The devs really did a good job on this one and they deserve every cent.
This site has made me try before I buy because I have been conned in some aircraft’s and airports previously and now I can say I made the right decision thanks to all who contributed.
Popular airport receiving two great scenery packs
There is just one great scenery…Tailstrike 😉
Do you see the elevation issue when the airport fences and some structures are floating the air.
Yes. I have to say that i have the prague city photogrammetry installed so maybe that’s why…
They did WHAA? 2 sceneries for our capital. Incredible.
Can anyone explain why it is recommended that of Tailstrike Designs?
I was going to buy the Orbx one and came across this. Please someone argue it
Detailed interior and better looking surrounding buildings. The only plus i see with the ORBX one is the included town landmarks. I’m fan of the ORBX one actually as a package but this one is so good, plus this one has better frame rates than the ORBX version.
So this one doesn’t have any landmarks and Orbx does? Are the landmarks good enough to make a difference? How many are there?
Orbx are always generous with landmarks, it’s their specialty. I didn’t count the landmarks. But I’ve flown over the city with and without landmarks and there’s definitely a lot added with the ORBX scenery. This one doesn’t have landmarks no. Why don’t you try them both and decide for yourself??
Looks to be very high quality. It’s not like Orbx LKPR is bad but this one looks very good.
Basically newer layout and some interior modeling .But it is the same airport , just try it by yourself and then buy whatever you want . btw in ORBX version is sometimes weird terrain bug . I did not try this yet , but it should be better .
Someone wrote their thoughts on fselite site
That’s easy to answer. It’s just thoroughly modelled and closer to reality than Orbx’s version. The only con is that it’s much more demanding on hardware.
Hi there! I lived in Prague for 3 years and at first, I was impressed by Orbx’s scenery of Praha airport, but Tailstrike have done so well to stick to their plan of still releasing this scenery despite the competition. The attention to detail is fantastic, taking advantage of where Orbx missed the mark, especially when it comes to night lighting and the colour of the runway lights (this stood out to me) and with some interior terminal details too (where it matters). It’s also just as FPS friendly after doing a flight from EGLL.
Honestly, in my personal opinion, they deserve the purchase, and I will be going onto to support them after trying it here. Look forward to their future sceneries!
They are both very nice and detailed. I bought the ORBX one and very happy with it and will probably stick to it because at this stage every gigabyte saved is more space for something else on a SSD.
Well, based on the video of this product, what this one has better than Orbx one is:
1.- It offers VDGS
2.- The interior was modelled and it contains some slightly animated people with acceptable quality resolution, this feature is an Orbx weakness.
3.- Some detailes as the graffity in one of the walls. Might be wrong but I have not seen it in Orbx one, also the color of the fence and some animations
4.- Looks like they used “glass” for some areas of the airport.
But overall the quality of textures in Orbx one is a lot better
If the modelling of the interior of the terminal is important for you then this one suits you better. It’s nor bad at all.
I personally will go for Orbx one but regret their terminal is not modelled which now costed them a star and possibly sales against Tailstrike one.
Tailstrike is simply a better scenery. More advanced, detailed and visually stunning.
ITS more accurate with better Night lighting
Honestly, both are great. This one has great textures and it run smoothly for me. It’s not a clear cut decision which one to recommend, try both to see which runs better on your PC.
according to someone on fselite:
There is way too much to think about honestly. The price is much lower than Orbx version, Orbx is already outdated as there is a new taxiway at the airport, Orbx lacks detail in terms of 3D terminal interior, the radar on top of the tower is proportionally incorrect, and overall feeling of it is that Orbx has rushed their release, as compared to Tailstrike Designs, who really took their time to create this scenery. This comes from someone who has already been to Prague Airport and I have a lot of friends from the area that will tell you the same as I did.
Thank you all for your participation. I will try this one before I decide, to see the performance. If it performs well as they say, then I will support this developer.
Terminals modelled and night/runway lights are much better in this one. If you try it with one OLED TV it is almost like real life.
I couldn’t resist installing it to compare them. Sadly if offers more than Orbx one. It is really nice and very well done. I didn’t expect to say this but, they beat Orbx.
thank you
Thank you
amazing, thx SP
Comments are closed.